Substitution of satellite-based land surface temperature defective data using GSP method

Land surface temperature (LST) as an important environmental variable provides valuable information for earth environmental system modelling. Currently, LST is obtained through satellite thermal sensors at various spatial and temporal resolutions. Although spatially continuous satellite-based LST measurements are intended to overcome the shortcomings of sparse ground-based LST measurements, LST images often contain anomalous values due to the existence of clouds or sensor malfunctioning. The problem becomes more serious where the users deal with high spatial resolution characterized by low temporal resolution. This study examines the capability of a newly developed graph signal processing (GSP) method using two-dimensional single-date thermal data. For this purpose, four Landsat/TIRS datasets are analyzed. The data of five elliptical regions on thermal images are eliminated and then reconstructed through the GSP method and using the LST values of the enclosing rectangles containing the ellipsoids. The results indicate that the temperature variation determined by the GSP method generally conforms to the original image LST values. According to a correlation test conducted on the original image LST and those obtained through the GSP method, the values vary from 58% to 95%, which is an above-the-average rate (RMSE from 0.69 to 2.27). The statistical analysis of the original image LST in both the elliptical regions and the enclosing rectangles containing the ellipsoids indicates that an increase in the variance of LST data causes an increased error in the calculation of temperature by the GSP method, and vice versa. The results of the analysis of variance (ANOVA) and Duncan test indicated that an increase in the number of the non-zero spectral bins would result in increased RMSE values for all the dates and the regions. Moreover, the model errors were significant at the 0.05 level across all the image date and five elliptical study regions. Based on the results, the use of this method is recommended for the reconstruction of LST missing values, where dissimilarity of atmospheric conditions limits the use of other methods that depend on the time series data of various dates and a great deal of data calculation.     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

基于北斗三号的长基线共视时间比对

卫星导航共视时间比对一直是远距离时间比对的重要方法之一。使用我国最新发射的北斗三号全球导航卫星，基于中科院国家授时中心（NTSC）和捷克光电研究院（TP）各自的时间产生和保持系统，开展了中捷北斗三号长基线共视时间比对试验。本文对中捷两站各自的北斗卫星可视数及其卫星高度角情况进行了统计分析，利用Vondark滤波对时间比对结果进行了降噪处理，最后将北斗三号共视时间比对结果与北斗二号及GPS共视时间比对结果进行了比较。结果表明：北斗三号在当前全球组网阶段中捷共视可视卫星数比北斗二号还少的情况下，其共视时间比对精度达到1.16ns，较北斗二号提升约19%，与GPS更为接近。     

原子时自动测量及数据采集系统

介绍了普通的时间实验室的时频测量,实现自动测量和数据收集的基本系统方案,并以上海天文台原子时实验室为例介绍了实际可行的自动测量和数据收集系统,这个系统高性能、低价格,可应用于国内几乎所有的时间实验室。     

VKM—5型立式捏合机研制与应用

介绍自行研制的VKM—5型立式捏合机的构造及工作原理,详述了该机采用液压传动和气动元件进行位置检测以及气、电、液安全联锁的特点,并说明与卧式捏合机对比试验情况。     

卡尔曼滤波动态优化及其在遥控机器人空间实验中应用

本文是在文献[1]的基础上,讨论遥控机器人追踪自由飞行目标物的动态性能问题。应用黄金分割法和元素交替极小化法对扩展的卡尔曼滤波初值条件进行搜索并获得优化解。仿真结果表明优化方法简单可行,优化解满足系统性能要求。     

卫星VLBI观测时延和相位条纹旋转模型研究

空间卫星在绕地球或月球等星体运行时，为了跟踪和控制卫星就要时刻掌握其在空间的位置和运动状态．但由于地球的自转和公转使得卫星和地球之间的相对运动描述关系变得复杂，目标卫星相对地球任意两个观测站的时间差(时延)和多普勒频移(相关条纹旋转)时刻都在改变．VLBI相关处理机是卫星观测和空间探测极为重要的技术手段，其原理以FX和XF两种相关模型处理观测数据．以FX相关模型为基础修正VLBI观测数据的时延补偿和相关条纹旋转的模型，提出对称“1／n Multiplier”时延补偿模型和条纹旋转模型，并且对实际观测数据进行操作和详细分析，对相关相位谱的剩余时延变化趋势和方差分布进行分析，从中找出优选时延补偿和条纹旋转模型．对于精确描述卫星轨道运动状态提供更准确的方法．     

激光外差干涉仪光电信号处理方法及特点

叙述和分析了外差激光干涉光电信号处理主其特点，指出了它们各自的应用范围，同时介绍了一处新型的光电信号处理方法，它不仅使外差干涉仪用于动态测量，而且可以同时实现高分辩率测量 。     

改进的次时间最优控制

本文在[1][2]基础上进一步探讨了次时间最优控制的改进问题,深入地阐明了次时间最优控制的某些特性后,提出了一个新的改进的设计方法。按照这种方法设计控制系统,不但实用而且可以大幅度提高次时间最优控制的最优性。并用实例比较了各种方法,证明了本文提出的方法的优越性。本文提出的方法应用于工程设计,对于提高系统的最优性是非常有效的。     

利用CAD工程图自动生成数控加工程序

本文介绍了利用工程图自动生成孔加工程序的方法。既可以自动选择图中不同尺寸的孔,又可以避免同一坐标位置多个同尺寸的圆的问题。同时又克服了手工编程容易出现错误的问题。也避免了其他自动编程软件需要在图上选择要加工的孔困难。